Gold Toned Finish Stainless Steel Table Bases
Gold Toned Finish Rectangular Stainless Steel Table Bases.
16" X 28" Rectangular, Dining Height And Bar Height.
For Indoor & Outdoor Use.
Stainless Steel Shroud Over
Plate Steel Powdercoated Ballast Bottom.
3" Square Stainless Steel Columns.
13 1/2" X 13 1/2" Stamped Steel Top Plate Attachment "Spiders".
Adjustable Levelers On Table Base Underside.
Standard Dining Height ( 28 1/4" ) And Bar Height ( 40 1/2" ) Available.
16" X 28" Base Equipped With 3" X 3" Columns
( Call For Maximum Recommended Table Top Sizes )
Stainless Steel Table Base Painted Bottom And Leveler Glide Details.
These stainless steel table bases are very resistant to corrosive environments but do require periodic care and maintenance.
Cleaning is necessary on any grade stainless steel to prevent corrosive particles from gathering in the grain of the stainless steel surface.
Corrosive particle build-up results in a rust colored stain. One might think that the stainless steel is rusting but it is actually the corrosive particles
that are reacting and causing staining. Weekly cleaning with a good stainless steel cleaner will keep the stainless steel surfaces free from corrosive particles.
In environments where there is salt and or chlorine present weekly cleaning with water and liquid detergent followed by drying will keep the stainless steel surface
free from contamination.
If you move your tables frequently we recommend using
Loctite® Threadlocker Blue 242® to prevent losing the adjustable leveler glides supplied with these bases.