Picnic Table
With Benches ( Three Piece Sets )
Frames are 1-1/2″ steel square tubing and 14 gauge 1/4″ flat steel legs with leveler glides. Exterior black powder coating standard.
Table Tops and Seats are a 12mm thick ( 15/32 inch - almost 1/2 inch ) solid core HPL product comprised of thin layers of kraft paper saturated with phenolic resin then pressed under high temperature & pressure
which provide extreme durability for exterior use.
Three standard finishes are available as shown below. Finished color of phenolic resin core is black.
Easy to clean, water resistant, UV protected, environmentally friendly & low maintenance.
Screws & Tools Provided must be used to mount the table tops and seats to the frames. See Below.
Predrilled 2 Inch Umbrella Holes With Grommets Are Standard. Umbrella bases sold separately.
Picnic Table Length 72" X 30" Wide X 30" High.
Bench Length 72" X 16" Wide X 18" High.
Standard Picnic Table Set Seat And Top Finishes
The grooves/channels shown mimic a "plank" appearance on the solid core resin wood grain patterns.
These are actual slight indentations just under 1/8” wide.
HPL Solid Core Seat and Table Top Detail.
Grommet Detail.
Simple Assembly Required.
Attach Seats And Top To Steel Frame Components.
All Hardware, Tools And Instructions Are Included.
Picnic Table And Picnic Benches Are Also Available Separately
Screws & Tools Provided must be used to mount the table tops and seats to the frames.
Use drill ( not provided ) & self-centering bit ( included ) to drill pilot holes.
The drill bit has a stop to identify where to cease drilling.
Use driver bit ( included ) with drill to start screws ( included ).
Only use screws provided or warranty is void.